Emergency-Stop Switch; Protective Cover Of The Headstock - Optimum OPTI turn TU 3008G Operating Manual

WARNING!
The protective equipment for material separation that is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them being
expelled from the machine, but not to remove them entirely.
1.9.1

Emergency-stop switch

CAUTION!
The drive or the lathe chuck will continue to run for a while, depending on the mass
moment of inertia of the lathe chuck and the workpiece.
The emergency stop button brings the machine to a standstill.
Turn the knob to the right to unlock and release the emergency stop button.
CAUTION!
Only press the emergency stop button in a genuine emergency. Do not use the
emergency stop button to stop the machine during normal operation.
Emergency-stop switch
1.9.2

Protective cover of the headstock

The headstock of the lathe is equipped with a separating protective cover. The protective cover
is equipped with an interlock switch and can only be opened when the machine is turned off.
Interlock switch
GB TU3008G
12
Img.1-1: Emergency-stop switch
Img.1-2: Protective cover of the headstock
Translation of original instruction
Safety
Version 1.1.6 - 2021-9-17