Top Cage For Touratech Rear Cargo Rack (If Applicable) - BRP LYNX Commander 800R E-TEC Touratech Operator's Manual

2. Insert the lower section of side
panel over the aluminium chassis
and the aluminium tab into the panel
slot.
mmo2009-004-047_a
1. Lower section
2. Aluminium chassis
3. Aluminium tab
4. Panel slot
3. Insert the panel dowel into the tun-
nel hole.
mmo2011-006-102_a
1. Dowel
2. Tunnel hole
4. Hook the rubber tie.
5. Lock the clip by turning it 1/4 turn
clockwise.
Lower Side Panel Removal/
Installation
1. Open lower side panel as explained
above.
2. Lift the front of side panel and free
the lower hinge from its slot.
3. Free the upper hinge by lowering
the panel.
Reverse procedure for installation.
CONTROLS, INSTRUMENTS AND EQUIPMENT
28) Top Cage for Touratech
Rear Cargo Rack (If
Applicable)
Top Cage Opening / Removal /
Installation
All objects in top cage must be
properly latched. Do not carry
any breakable objects. Excessive
weight in rack may reduce steering
ability.
Always readjust suspension ac-
cording to the load.
Never ride with the top cage un-
locked.
To open the top cage detach stop
straps securing it.
There are four stop straps on each
sides.
fmo2016-002-004_a
1. Top cage
2. Stop strap
Press the tab on the stop strap to open.
_______________
WARNING
WARNING
WARNING
59