BRP LYNX Commander 800R E-TEC Touratech Operator's Manual page 84

MAINTENANCE SCHEDULE
Clean and lubricate rewind starter
ENGINE
Inspect fuel pump strainer and replace if necessary
FUEL
SYSTEM
Inspect throttle cable
Replace brake fluid
Lubricate the splines of joint between QRS axle and gearbox
DRIVE
SYSTEM
Lubricate the splines of joint between driven pulley and QRS axle
Replace the following drive pulley wear parts: slider shoes, O-rings
and sliding sheave bushing
Retighten rear member screws to frame to specified torque (XU)
FRAME
24 N•m (18 lbf•ft)
Inspect oil pump strainer and clean if needed
ENGINE
Clean 3D rave valves
Replace the following drive pulley wear parts: spring cover bushing
DRIVE
and ramps (E-TEC)
SYSTEM
ELECTRICAL
Replace spark plugs
SYSTEM
Replace engine coolant
ENGINE
FUEL
Replace in-line fuel filter
SYSTEM
______________
82
EVERY 6 000 KM (4,000 MI) OR 2 YEARS
(WHICHEVER COMES FIRST)
EVERY 10 000 KM (6,000 MI) OR 3 YEARS
(WHICHEVER COMES FIRST)
EVERY 5 YEARS