BRP LYNX Commander 800R E-TEC Touratech Operator's Manual page 102

MAINTENANCE PROCEDURES
NOTICE
Plastic retaining pins
may break if taillight assembly is
forced sideways. Avoid sideways
movement when pulling taillight
out.
NOTICE
Do not pull taillight hous-
ing out too far to avoid damaging
wiring.
2. Remove lamp socket from taillight
assembly.
2.1 Turn socket
wise.
2.2 Pull socket out.
3. Replace bulb.
4. Secure socket into taillight assem-
bly.
5. Push taillight assembly back into
place.
NOTE: Led taillight: leds cannot be re-
placed.
If led taillight is failed change taillight
assembly. Fasten new taillight by
screws.
______________
100
counterclock-