Front Bumper; Rear Rack - BRP LYNX Commander 800R E-TEC Touratech Operator's Manual

fmo2016-002-018_a
Step 1: Pull rubber tab
Step 2: Lift RH side
To close lid, simply push it down until it
latches.
Battery
Battery is located in storage box. To
get access to battery push battery
cover notches both sides of cover and
remove it
fmo2012-003-004

17) Front Bumper

To be used whenever snowmobile re-
quires manual lifting.
CAUTION Use proper lifting
techniques, notably using your legs
force. Do not attempt to lift either
end of the vehicle if it is above your
limits. Use appropriate lifting de-
vice or have assistance to share lift-
ing stress if possible.
CONTROLS, INSTRUMENTS AND EQUIPMENT
fmo2012-003-006_a
TYPICAL
1. Front bumper
NOTICE
dles to pull or lift snowmobile.
Heavy Duty Front Bumper
Heavy duty front bumper protects the
front part of sled and it provides plat-
form for front cargo rack.
fmo2016-002-017_a

18) Rear Rack

The rear rack can accommodate per-
sonal articles (luggage), a fuel caddy or
the storage box.
All objects in rear rack must be
properly latched. Do not carry
any breakable objects. Excessive
weight in rack may reduce steering
ability.
_______________
Do not use skis or ski han-
WARNING
53