Handlebar; Throttle Lever; Brake Lever; Parking Brake Lever - BRP LYNX Commander 800R E-TEC Touratech Operator's Manual

Table of Contents

Advertisement

CONTROLS, INSTRUMENTS AND EQUIPMENT

1) Handlebar

The handlebar controls the steering
of the snowmobile. As the handlebar
is rotated to right or left, the skis are
turned right or left to steer the snow-
mobile.
WARNING
Fast reverse while turning, could
result in loss of stability and con-
trol.

2) Throttle Lever

Throttle Lever
Throttle lever is located on the RH side
of handlebar.
Designed to be thumb activated.
When squeezed, it increases the en-
gine speed. When released, engine
speed returns automatically to idle.
mmo2008-008-011_b
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate
WARNING
Test the throttle lever operation
each time before starting the en-
gine. The lever must return to its
the rest position once released.
Otherwise, do not start engine.
______________
36

3) Brake Lever

Brake lever is located on the LH side of
handlebar.
When squeezed, the brake is applied.
When released, it automatically re-
turns to its the rest position. Braking
effect is proportional to the pressure
applied on the lever and to the type of
terrain and its snow coverage.
mmo2014-004-001_a
TYPICAL
1. Brake lever
2. To apply brake

4) Parking Brake Lever

Parking brake lever is located on the LH
side of handlebar.
Parking brake should be used when-
ever snowmobile is parked.
mmo2014-004-001_b
TYPICAL
1. Parking brake lever

Advertisement

Table of Contents
loading

Table of Contents