Description - Siemens SIMATIC NET RUGGEDCOM RSG2488F Installation Manual

Introduction
1.2 Description
•
1.2

Description

The RUGGEDCOM RSG2488F features various ports, controls and indicator LEDs on
the front panel for connecting, configuring and troubleshooting the device.
1
2
1
2
3
4
5
6
7
8
9
10
11
12
Figure 1.1
Power Status LEDs
RS-232 Console Port
Management Port
2
Conformal coated printed circuit boards (optional)
4
Front
Rear
Power Modules
Power Status LEDs
RS-232 Serial Console Port (DB9)
Management Port
Alarm Indicator LED
Access Plate
Port Status LEDs
Line Modules
Power Supply Terminal Block
Chassis Ground Terminal
RUGGEDCOM RSG2488F
3
4
10
Indicates the status of the power modules.
LED
I The power module is receiving power
O The power module is supplying power
The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page
The 10/100Base-T Ethernet management port is for system
management that is out-of-band from the switch fabric. For
information about connecting to the device via the 10/100Base-
T Ethernet management port, refer to
(Page 21)".
5 6 7 9
8
Description
21)".
"Connecting to the Device
RUGGEDCOM RSG2488F
Installation Manual, 07/2021, C79000-G8976-1351-07
11
11 12