Summary of Product parts
Body
Name
∗
Display
Connector
Lead wire with M8 connector
Piping port
Body
∗: A protective tape is affixed to the display. Please remove it before use.
Display
Element
Main screen (2-colour display)
Sub screen
Output display (Indicator LED)
Unit display
UP button
SET button
DOWN button
IO-Link status indicator light
See below.
M8 connector for electrical connections.
Lead wire for power supply and outputs.
For piping connections. Connected to the fluid inlet at IN and to the fluid outlet at OUT.
The body of the product.
Displays the flow, the status of setting mode and error code.
Displays the accumulated flow, set value, peak/bottom value and line names.
In the measurement mode, the set status is displayed.
Displays the output status of OUT1 and OUT2. When ON: Orange LED is ON.
Displays the unit selected.
Selects a mode and the display shown at the sub screen, and increases the ON/OFF
set values.
Press this button to select mode and to confirm a set value.
Selects a mode and the display shown at the sub screen, and decreases the ON/OFF
set values.
LED is ON when OUT1 is used in IO-Link mode. (LED is OFF in SIO mode)
-13-
Connector pin numbers
(on the product)
1
DC(+)
OUT2/Analogue output/
2
External input/N.C.
3
DC(-)
4
OUT1
Description
Description
No.PF※※-OMZ0002