SMC Networks PF2MC7 Series Operation Manual page 96

Digital flow switch
Hide thumbs Also See for PF2MC7 Series:
Table of Contents

Advertisement

Model
IO-Link type
IO-Link version
Communication speed
Min. cycle time
Process data length
On request data communication
Data storage function
Event function
Vendor ID
∗11
Device ID
∗1: When using the accumulated value hold function, calculate the product life from the operating conditions, and use the product within
its life. The maximum access limit of the memory device is 1 million cycles. If the product is operated 24 hours per day, the product life
will be as follows:
•Data memorized every 5 minutes --- 5 minutes x 3.7 million times = 5 million minutes = 35 years
•Data memorized every 2 minutes --- 2 minutes x 3.7 million times = 2 million minutes = 14 years
If the accumulated flow external reset is also repeatedly used, the product life will be shorter.
∗2: Do not release the OUT side piping port of the product directly to the atmosphere without connecting piping. If the product is used with
the piping port open to atmosphere, accuracy may vary.
∗3: The response time is when the set value is 90% in relation to the step input. (The value will be 7 s for the temperature sensor output.)
∗4: If the flow fluctuates around the set value, the hysteresis must be set to more than the fluctuation width. Otherwise, chattering will
occur.
∗5: Digital filter value is not included.
∗6: This function is available for models with analogue output.
∗7: The time from when the flow is changed as a step input (when the flow rate changes from 0 to the maximum flow instantaneously)
until the analogue output reaches 90% of the rated flow rate.
∗8: This function is available for models with external input.
∗9: The flow rate given in the specification is the value at standard condition (ANR).
∗10: Setting is only possible for models with the unit selection function.
∗11: The Device ID varies depending on the product No.
Cable specifications: Lead wire with M8 connector (ZS-40-A)
Item
Nominal cross section
Conductor
Outside diameter
Material
Insulator
Outside diameter
Colorurs
Sheath
Material
Finished outside diameter
PF2MC7501
PF2MC7102
COM2 (38.4 kbps)
Input Data: 4 byte, Output Data: 0 byte
131 (0x0083)
Refer to direct parameters page 1 (page 80)
Specifications
AWG23
Approx. 0.7 mm
Heat resistant PVC
Approx. 1.1 mm
Brown, White, Black, Blue
Heat and oil resistant PVC
φ4
-95-
PF2MC7202
Device
V1.1
3.4 ms
Available
Available
Available
No.PF※※-OMZ0002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pf2mc7501Pf2mc7102Pf2mc7202

Table of Contents