Monitoring the Switch
Table 17: LEDs for Data Ports (1-32) (continued)
Port Configuration
40 Gb
or 4x10 Gb
SLX 9250 Series Front Panel System LEDs
Table 18: Front Panel System LEDs
Label or Type
PSU1, PSU2
(Power Supplies)
FAN
SYS
(System)
PWR
(Power)
750 W AC Power Supply LEDs
The following tables describe the meanings of the LEDs on the 750 W AC power supply (part number
XN-ACPWR-750W-F or XN-ACPWR-750W-R).
The LEDs are located on the end of the power supply unit, arranged vertically to the left of the power
cord receptacle.
Color/State
Steady green
Blinking green
Slow blinking green
Off
Color/State
Steady green
Steady amber
Off
Steady green
Steady amber
Off
Steady green
Blinking green
Steady amber
Blinking amber
Off
Steady green
Blinking green
Off
ExtremeSwitching SLX 9250 Hardware Installation Guide
750 W AC Power Supply LEDs
Meaning
Port OK
Port transmitting or receiving
Port disabled by software
No link/Fault
Meaning
PSU is installed and providing power
PSU is installed but input power is
disconnected or unit fault detected
PSU is not installed
All fans operating normally
A fan has been removed or fault detected
No power to fan modules
Normal operation; agent software code has
been loaded
Loading the agent software code
Error encountered while running diagnostic
software
Loading and executing the boot loader or
diagnostic software
Unit not operational
Normal operation
System in reset
Unit not operational
63
Need help?
Do you have a question about the ExtremeSwitching SLX 9250 and is the answer not in the manual?
Questions and answers