Making A Cvemp Recording; Electrode Montage For Cvemp; Stimuli For Cvemp - Interacoustics Eclipse EP15 Instructions For Use Manual

4.6 Making a cVEMP recording

The cVEMP test is a test to assist in the assessment of vestibular function.

4.6.1 Electrode montage for cVEMP

Red Right SCM (reference or inverting)
White Left SCM
Black Ground
Blue Clavicular joint (active or non-inverting)

4.6.2 Stimuli for cVEMP

Typically, a 500Hz tone burst is used for cVEMP testing as it provides the largest response amplitude. Other
stimuli available for testing include:
•
Tone bursts 250Hz – 4kHz
•
Click
•
Custom WAV file (when Research Module license is enabled).
D-0120588-B – 2019/03
Eclipse – Instructions for Use - EN
Page 62