Adding Comments To A Curve - Interacoustics Eclipse EP15 Instructions For Use Manual

3.1.52 Adding comments to a curve

Comments for the selected curve can be entered into the comments box in the upper right hand corner by
clicking inside the box and then entering text.
These comments will be displayed only when the corresponding curve is selected. All curve comments will
be printed on the "Curves Conditions" report page.
Consider also to use the function Waveform Note where a Note can be added and displayed next to the
waveform (Right click on the intensity handle to access it).
D-0120588-B – 2019/03
Eclipse – Instructions for Use - EN
Page 36