The Assr Tab; Main Menu Items; Protocol Selection; Temporary Setup - Interacoustics Eclipse EP15 Instructions For Use Manual

9.7 The ASSR tab

The following section describes the elements of the ASSR Tab.
The ASSR Tab is where you start, monitor and control the ASSR test.

9.7.1 Main menu items

File provides access to the System setup, Print all pages, Print preview, Print setup and Exit.
1. Enter the System setup to create or edit existing protocols.
2. Select Print all pages or use Ctrl+P to print all report pages.
3. Select Print preview to preview the print report. All pages that are available for print are displayed.
4. Select Print setup to select printer settings.
5. Select Exit to exit the EP15/25 software.
Help provides access Help topics and About...
1. Select Operation Manual to launch a PDF version of the operation manual.
2. Select About Interacoustics ASSR... to access information about the software version number, the
DSP version, the Hardware version and the Firmware version.

9.7.2 Protocol selection

Select a Test Protocol from the dropdown menu.

9.7.3 Temporary setup

The Temporary Setup icon allows temporary changes to be made the selected protocol. Changes will only
apply to the current test session. Modified protocols will display an asterisk (*) next to the protocol name.
D-0120588-B – 2019/03
Eclipse – Instructions for Use - EN
Page 109