Appearance Introduction - Goodwe HT Series User Manual

[1] DC connector*: 20 pairs for 100kw, 24 pairs for GW73KLV-HT&110kw&120kw&136kw.
[2] Optional module.
[3] The number of accessories is subject to change without notice.
[4] Text materials*: Include manuals.

3.3 Appearance Introduction

After opening the package, check the product to confirm whether it is consistent with the
specifications of the inverter you purchased. The appearance of the product is shown in the
diagram. The layout of the inverter ports of different powers will differ.
Front view(without LCD)
Left view
10
7
6
10
1 2
Front view(with LCD)
1 2
GW73KLV-HT/GW110K-HT/GW120K-HT/GW136K-HTH Bottom view
1 2
05
Right view
5
9
1 3 4
5
9
13
12
1 3 4
1 3 4 5
No. Name
1 DC switch
8
10
2 DC terminal
7
8
3 Communication module
11
4 RS485 communication port
10
5 AC junction box
6 Fan assembly
7 Handle
8 back hanging bracket
9 Indicator
10 Lifting ring, handle mounting hole
11 Ground port
12 Button
13 LCD
GW100K-HT Bottom view
1 2 1 3 4 5
Description
Used to safely disconnect the DC input as required. When the
input and output meet the requirements, the inverter will run
automatically. Turning the DC switch to the "OFF" position
will immediately cut off the DC input. You need to turn the DC
switch to the "ON" position before starting the inverter.
Used to connect PV strings.
Used to connect the communication module so that the
inverter can use the corresponding communication method.
Used to connect data monitoring and other equipment.
Used to connect AC cables.
Used to dissipate heat from the inverter and needs to be
cleaned regularly.
Used to carry the inverter.
Used to secure the inverter on the backhanger.
Display of the operating status of the inverter.
Used to mount lifting rings and handles for inverter installation.
Used to connect the ground wire to ground the inverter.
Used to operate and configure the inverter.
Used to view the inverter operating parameters.
06