Operating Instructions; Indicator Description; Description Of Display Screen And Buttons - Goodwe HT Series User Manual

5 Operating Instructions

5.1 indicator Description

Model without display
Model with display
Green Light Green Light Green Light
Code Status Description
Long time ON: Equipment is powered on
Power Supply OFF: Equipment is powered off
Long time ON: The grid is correct and the grid-tie is successful
OFF: Not grid-tied
Single slow flash: Self-check before grid-tie
Operation
Single fast flash: Grid-tie soon
Long time ON: Wireless monitoring is operating correctly
Single flash: Wireless module reset
Double flash: No base station connected
Four flashes: Server not connected
SEMS
Flashing: RS485 communication is operating correctly
OFF: The wireless module is restoring factory settings
Long time ON: System error
OFF: No failure
Failure
21
Red light

5.2 Description of Display Screen and Buttons

Note:
For inverters without display, scan the QR code on the left to download
and install the SolarGo App, and complete the corresponding
configuration operations in the App.
SolarGo App
Setting the country of safety regulations:
If the LCD displays "GW100K-HT Power = XXXXX watts" , press and hold for 2s to enter the first
level menu "China's max voltage" . In the second level menu, select the appropriate safety
regulation country according to the installation location, and wait 10s after selecting the country.
The machine will display "Setting up..." . Complete the setup, then a message will appear:
"Setting is completed successfully" or "Setup failed" .
(1) The display screen is shown on the right
Grid-tie power generation
Power = XXXXX watts
(2) The description of the display area is as shown on the right
1st row
2nd row
1st row: Display bar of status information:
*The first row shows the status information of the system. Display of "Waiting for power
generation power = 0 watts" means the inverter is in standby state;
Display of "Detection timing **sec
self-checking and preparing to generate electricity; Display of "grid-tie power generation
power =XXXXX watts" means that the inverter is in power generation state; when an abnormal
state occurs in the system, an error message will be displayed. For details, refer to the *5.3 Failure
Information* table.
*The operating parameters of the system can be switched and displayed in the status bar by
pressing the buttons. There are two levels of menus for the buttons. The specific switching of
contents and its procedure can be seen in the right diagram:
*The menu display is controlled using the buttons. Long press the button to enter the submenu
2nd row: This area displays the real-time power generation of the inverter
(3) Button Description
The buttons are categorized into two operations: Short press and long press
(4) Details of buttons and LCD screen:
*The basic functions can be set by pressing the buttons, such as time, language, safety regulation
country, etc., and the data can also be checked by pressing the buttons.
*The LCD screen status display area is divided into two levels of menus. In some of first level
menus, second level menus can be entered into by long pressing the buttons; If there is no
second-level menu, press and hold for 2 seconds to lock the current display interface.
*In all menus, the system will automatically revert to the first item of the first level menu after 20
seconds if no button is operated.
power = 0 watts" indicates that the inverter is
22