Product Overview - Aerohive Networks AP121 Hardware Reference Manual

Chapter 10 The High Capacity HiveManager
P O
RODUCT VERVIEW
The High Capacity HiveManager is a central management system for configuring and monitoring Aerohive
devices. You can see the hardware components in
Table 1 "High Capacity HiveManager component
Figure 1 High Capacity HiveManager hardware components
Front
panel
Front
mounting
bracket
Rear
panel
Serial
number label
Table 1 High Capacity HiveManager component descriptions
Component
Hard Disk Drive Trays
Front Mounting Brackets
USB Ports
98
Figure 1 and read a description of each component in
descriptions".
Hard disk drive trays
USB
ports
System fans
Description
The two hard disk drive trays contain first-level RAID (Redundant
Array of Independent Drives) mirrored hard disk drives to provide
fault tolerance, data reliability, and increased performance.
When used with the rack mounting kit, the two front mounting
brackets allow you to mount the High Capacity HiveManager in a
standard 19" (48.26 cm) equipment rack. For rack mounting
instructions, see "Rack Mounting the High Capacity HiveManager"
on page 100.
The USB ports are reserved for internal use.
Console Reset Power
port button switch
MGT and LAN Power
Etherent ports LED
Dual AC power
supplies
Front
mounting
bracke
t
Aerohive