Aerohive Networks AP121 Hardware Reference Manual page 85

Chapter 8 The AP320 Platform
AP320 P
RODUCT
The AP320 is a multi-channel wireless access point. It is compatible with IEEE 802.11b/g/n (2.4 GHz) and IEEE
802.11a/n (5 GHz) standards and supports a variety of Wi-Fi (wireless fidelity) security protocols, including
WPA (Wi-Fi Protected Access) and WPA2.
You can see the hardware components on the AP320 in
"AP320 component descriptions".
Figure 1 AP320 hardware components
Status LEDs
POWER
WLAN0
WLAN1
ETH0
ETH1
Table 1 AP320 component descriptions
Component
Status LEDs
ETH0 10/100/1000 Mbps PoE
Port
and ETH1 10/100/1000 Mbps
Port
84
O
VERVIEW
Mounting plate
Lock slot
Description
The status LEDs convey operational states for system power, firmware,
Ethernet interfaces, and radios. For details, see
The two 10/100/1000-Mbps Ethernet ports—ETH0 and ETH1—receive RJ-45
connectors. The AP320 can receive power through an Ethernet connection
to the ETH0 port from PSE (power sourcing equipment) that is compatible
with the 802.3af and 802.3at standards. Aerohive provides suitable PoE
injectors as an optional accessory. (If you connect the AP320 to a power
source through the power connector and the ETH0 PoE port simultaneously,
the device draws power through the power connector and automatically
disables PoE.)
Figure 1. Each component is described in
ETH0 ETH1 48VDC CONSOLE
"Status LEDs" on page
Table 1
Reset button
86.
Aerohive