Ap340 Product Overview - Aerohive Networks AP121 Hardware Reference Manual

Chapter 7 The AP340 Platform
AP340 P
RODUCT
The AP340 is a multi-channel wireless access point. It is compatible with IEEE 802.11b/g/n (2.4 GHz) and IEEE
802.11a/n (5 GHz) standards and supports a variety of Wi-Fi (wireless fidelity) security protocols, including
WPA (Wi-Fi Protected Access) and WPA2.
You can see the hardware components on the AP in
"AP340 component descriptions".
Figure 1 AP340 hardware components
5 GHz (C)
Device lock slot
2.4 GHz (A)
Table 1 AP340 component descriptions
Component
Status LEDs
Device Lock Slot
802.11a/b/g/n RP-SMA
Connectors
64
O
VERVIEW
802.11a/n RP SMA connectors for detachable single band
802.11b/g/n RP SMA connectors for detachable single band
ETH0 48V DC 2.4 GHz (B)
ETH1
( 625A)
Description
The status LEDs convey operational states for system power, firmware,
Ethernet interfaces, and radios. For details, see
You can physically secure the AP by attaching a lock and cable (such as a
®
Kensington notebook lock) to the device lock slot or by using the lock
adapter that is included in the mounting kit and a padlock. For more
information, see "Locking the AP340" on page
You can connect up to six detachable single-band antennas to the male
802.11a/b/g/n RP-SMA (reverse polarity-subminiature version A)
connectors. Connect the longer antennas, which support 2.4 GHz
frequencies (for IEEE 802.11b/g/n), to the connectors on the side panel with
the Ethernet ports. Connect the shorter antennas, which support 5 GHz
frequencies (for IEEE 802.11a/n), to the connectors on the side panel with
the device lock slot. For details, see
Figure 1. Each component is described in
5 GHz (B)
CONSOLE RESET
"Antennas" on page
Table 1
Status LEDs
5 GHz (A)
2.4 GHz (C)
"Status LEDs" on page
76.
70.
Aerohive
70.