Mounting An Ap110 Or Ap120; Ceiling Mount - Aerohive Networks AP121 Hardware Reference Manual

M
OUNTING AN
Using one of the track clips included in the box with the AP, you can mount it to a track in a dropped ceiling
grid. To mount the AP to any flat surface that can support its weight (1.75 lb., 0.8 kg), use two #6 or #8 screws
to mount it on a wall and three screws to mount it on a ceiling.
You can also mount the AP on a table using the four rubber feet that ship with the product. Simply
peel the feet off the adhesive sheet and press one against each underside corner of the device.

Ceiling Mount

To mount an AP to a track in a dropped ceiling, use the appropriate track clip for the width of the ceiling
track. Two clips ship with the AP: one for 1" (2.54 cm) tracks and one for 1/2" (1.27 cm) tracks.
1. Nudge the ceiling tiles slightly away from the track to clear some space, and slide one tab of the track
clip over the edge of the track.
2. With the tips of the track clip prongs positioned against the middle of the track, press upward on the
other tab until it clears the track edge, as shown in
edges until both tabs grip the track ensures that the clip does not snap into place prematurely with only
one tab in position.
Figure 4 Attaching the track clip to the ceiling track
1
Position the clip so one tab is over
the edge of the ceiling track. (The
ceiling track is shown as transparent
to expose the tab above the track.)
The two prongs press upward against
the middle of the ceiling track.
3. Twist the track clip until it snaps onto the ceiling track, as shown in
along the track to reposition it if necessary.
Figure 5 Securing the clip to the track and repositioning it if necessary
3
Twist the clip until the prongs
snap into place and grip the
edges of the track.
If necessary, slide the clip along
the track to position it exactly
where you want it to be.
Hardware Reference Guide
AP110 AP120
OR
(Worm's eye view with ceiling tiles removed for clarity)
Figure 4. Keeping the prongs away from the track
2
Press the other tab upward,
flexing the prongs against the
track until the tab clears the
edge of the track.
Figure 5. You can then slide the clip
M AP110 AP120
OUNTING AN OR
35