Ap121 And Ap141 Product Overview - Aerohive Networks AP121 Hardware Reference Manual

Chapter 1 AP121 and AP141 Platforms
AP121 AP141 P
AND
The AP121 and AP141 models provide excellent throughput and coverage. The AP121has two internal
antennas, and the AP141 has four detachable external antennas. You can see these hardware
components in Figure 1. Each component is described in
descriptions".
To meet federal radiation exposure requirements, these devices should be installed at a minimum
distance of 23 cm or 9.06" from your body.
Figure 1 AP121 and AP141 hardware components
Mounting tab
ETH0 LAN port
Console port
External antenna
connectors
(AP141 only, two 2.4
GHz and two 5 GHz)
Table 1 AP121 and AP141 component descriptions
Component
Status Indicator
2.4 and 5 GHz
RP-SMA connectors
(AP141)
8
RODUCT
AP121
Status indicator
Power connector
Reset
USB modem port
AP121 and AP141 components (chassis shown upside down)
Description
The status indicator conveys operational states for system power, firmware updates,
Ethernet and wireless interface activity, and major alarms. For details, see
Indicator" on page 10.
You can connect up to four detachable single-band antennas (two 2.4 GHz and
two 5 GHz) to the male 802.11a/b/g/n RP-SMA (reverse polarity-subminiature
version A) connectors. The antennas and the connectors are labeled for easy
identification. For details, see
O
VERVIEW
Table 1 "AP121 and AP141 component
AP141
Security screw hole
Device lock slot
"Antennas" on page
Mounting tab
Security tab cavity
11.
"Status
Aerohive