Aerohive Networks Aerohive AP141 Quick Start

AP121
Attach the 5 GHz antennas to the 5 GHz
chassis)...
connectors (marked on the
and the 2.4 GHz antennas to the
2.4 GHz connectors.
ETH0
DHCP
Server
Connect a standard
Switch
Ethernet cable with
Ethernet
Some other network devices (They
RJ-45 connectors
cable might all be incorporated in the same
from ETH0 on the AP
device, such as a router or firewall.)
to a switch.
If the switch provides
PoE (Power over
Ethernet), cabling the
AP to the switch will
cause the AP to power
on in a few seconds.
Ceiling installation
Straight
Straight
45°
90°
90°
90°
45°
Straight
AP141
Internet
Firewall
Rail mounting
bracket
Ceiling track
If the switch does not
provide PoE, use the
AC/DC power adaptor
(available as an
accessory) to connect
the AP to a 100-240 AC
power source.
(Side view)
Wall installation
V-shaped tab
90° 45°
Tab slot
Straight 45°
V-shaped tab
(Bird's eye view with
Tab slot
ceiling tiles removed and
the ceiling track shown as
transparent for clarity)
Security tab slot
extension
V-shaped tab
Tab slot
Security tab slot
(Bird's eye view)
Wall
Security tab extension
V-shaped tab
Tab slot
Security tab slot
Security screw hole
Mounting plate
Security tab
extension
Security tab
slot
Security screw
Device lock slot
Screwdriver
Turn clockwise to tighten