Wiring Instructions - Mile Marker PE2.5 Installation And Operator's Manual

WIRING INSTRUCTIONS

NOTE: Be sure to mount control box in a location that: (a) does not interfere with any vehicle's moving / functioning parts, and (b) use electrical
cables with similar or better specifications as that provided by Mile Marker if a substitution is required.
CAUTION: Battery cables should not be drawn taut; leave some slack for cable movement. Also, ensure that they are routed properly with out
any interference with the vehicular components that could potentially damage the cable or cause electrical short.
Long battery cable runs may have significant voltage drops that may cause the winch motor controller to not operate properly.
DO NOT CONNECT POWER CABLES TO BATTERY UNTIL FINAL STEP OF INSTALLATION!
2-1: Wiring Diagram
Page 7