Wiring Instructions - Mile Marker PE2.5 ES Installation And Operator's Manual

NOTE:
Be sure to mount control box in a location that: (a) does not interfere with any vehicle's moving / functioning parts, and
(b) use electrical cables with similar or better specifications as that provided by Mile Marker if a substitution is required.
CAUTION:
Battery cables should not be drawn taut; leave some slack for cable movement. Also, ensure that they are routed
properly with out any interference with the vehicular components that could potentially damage the cable or cause electrical
short.
Long battery cable runs may have significant voltage drops that may cause the winch motor controller to not operate properly.
DO NOT CONNECT POWER CABLES
TO BATTERY UNTIL FINAL STEP OF
INSTALLATION!

Wiring Instructions

2-1: Wiring Diagram
9