WAGO 750-469/040-000 Manual page 20

20 Device Description
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
For further information about shielding, see system manual WAGO-I/O-SYSTEM
750 XTR, section "Connect Devices" > ... > "Shielding."
Manual
Version 1.3.0
750-469/040-000 2AI Thermocouple configurable /XTR
WAGO-I/O-SYSTEM 750 XTR