Table 4: Legend For Figure "Power Jumper Contacts - WAGO 750-407/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-407/040-000 2DI 220V DC 3.0ms XTR

Table 4: Legend for Figure "Power Jumper Contacts"

Contact
1
2
3
4
5
6
Pos : 29.6 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Sic herheits- und s onstige Hinweise/Achtung/Ac htung: Maxi mal er Strom Eins peisung 750-0407/040- 000 @ 17\mod_1382014146271_21.doc x @ 134451 @ @ 1
Do not exceed maximum current via power contacts!
The maximum current to flow through the power jumper contacts is temperature
dependent:
• Up to 60 °C: 10 A
• From 60 °C: 8 A
Greater currents can damage the power contacts. When configuring the system,
do not exceed this current. If that is the case, you must use an additional supply
module.
Pos : 30 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Type
Spring contact
Spring contact
Spring contact
Blade contact
Blade contact
Blade contact
Device Description
Function
Potential transmission (U
for field supply
Potential transmission (0 V)
for field supply
Potential transmission (ground)
for field supply
Potential feed-in (ground)
for field supply
Potential feed-in (0 V)
for field supply
Potential feed-in (U
for field supply
19
)
v
)
v
Manual
Version 1.3.0