1MRK 505 378-UUS Rev. J
2.4
Note signs
Line differential protection RED670
Commissioning manual
Always use a conductive wrist strap connected to protective ground when replacing
modules. Electrostatic discharge (ESD) may damage the module and IED circuitry.
Take care to avoid electrical shock during installation and commissioning.
Changing the active setting group will inevitably change the IED's operation. Be careful
and check regulations before making the change.
Observe the maximum allowed continuous current for the different current transformer
inputs of the IED. See technical data.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
Section 2
Safety information
M2697-2 v2
M2698-2 v2
M2693-2 v2
IP1497-1 v1
M19-2 v3
25