Oracle Exadata Storage Server X6-2 High Capacity Installation Manual page 55

Table of Contents

Press the green release tab (callout 1) on the slide-rail latching bracket

toward the left and slide the connector D out of the left slide-rail [frames 1

and 2].

When you slide connector D out of the left slide-rail, the slide-rail latching bracket portion

of the connector remains in place. You will disconnect it in the next step.

Once you have disconnected connector D, do not allow the CMA to hang under its own

Note -

weight. Throughout the remainder of this procedure, the CMA must be supported until all the

remaining connectors are disconnected and the CMA can be placed on a flat surface.

Use your right hand to support the CMA.

Remove the Cable Management Arm

Installing the Storage Server Into a Rack

Table of Contents