Table of Contents
Advertisement
Install the Cable Management Arm
The Oracle Exadata Storage Server X6-2 High Capacity (2U system) uses the round cable
covers.
Note -
CMA on a Oracle Exadata Storage Server X6-2 High Capacity, remove the flat cable covers and
install the round cable covers.
3.
Remove the flat cable covers and install the round cable covers.
To remove the flat cable covers and install the round cable covers, perform these steps:
a.
Lift up on the cable cover handle (the handle is colored green) and open
it 180 degrees to the horizontal position as shown in the following figure
[frames 1 and 2].
Note -
following figure), and one with a single hinge. All three cable covers are shown in
42
Oracle Exadata Storage Server X6-2 High Capacity Installation Guide • July 2018
The CMA ships with three flat cable covers installed. If you are going to install the
The CMA has three cable covers, two with two hinges (one of which is shown in the
Step
1.
Advertisement
Table of Contents
