Oracle Exadata Storage Server X6-2 High Capacity Installation Manual page 56

Remove the Cable Management Arm
c. Use your left thumb to push in (toward the left) on the connector D latching
bracket release tab labeled PUSH (callout 2), and pull the latching bracket
out of the left slide-rail and put it aside [frames 3 and 4].
6. To disconnect connector C:
Place your left arm under the CMA to support it.
a.
b. Use your right thumb to push in (toward the right) on the connector C
release tab labeled PUSH (callout 1), and pull connector C out of the right
slide-rail [frames 1 and 2].
7. To disconnect connector B:
a. Place your right arm under the CMA to support it and grasp the rear end of
connector B with your right hand.
56 Oracle Exadata Storage Server X6-2 High Capacity Installation Guide • July 2018