Table of Contents
Advertisement
For the location of the status indicator LEDs, see
and Drives" on page 11
and
Slots" on page
12.
Do not operate the storage server unless all fans, component heatsinks, air baffles,
Caution -
and the top cover are installed. Damage to storage server components can occur if the storage
server is operated without adequate cooling mechanisms.
Do not apply main power to the rest of the storage server until you are ready to configure
Note -
a preinstalled operating system or perform a fresh installation of an operating system. At this
point, power is supplied only to the SP and the power supply fans.
Related Information
"Rear Cable Connections and Ports" on page 59
■
"Ethernet Ports" on page 61
■
"Front Panel Status Indicators, Connectors,
"Back Panel Status Indicators, Connectors, Drives, and PCIe
Connect the Power Cords
Cabling the Storage Server
63
Advertisement
Table of Contents
Need help?
Do you have a question about the Exadata Storage Server X6-2 High Capacity and is the answer not in the manual?