Table of Contents
Advertisement
Install the Cable Management Arm
Note -
remove the latching bracket so that you can remove connector D.
12.
Gently tug on the four CMA connection points to ensure that the CMA
connectors are fully seated before you allow the CMA to hang by its own weight.
To verify that the slide-rails and the CMA are operating properly before routing
13.
cables through the CMA:
Extend all rack anti-tilt devices to prevent the rack from tipping forward
a.
when the storage server is extended.
Caution -
devices before extending the storage server from the rack. For instructions for stabilizing the
rack, see
48
Oracle Exadata Storage Server X6-2 High Capacity Installation Guide • July 2018
The slide-rail latching bracket has a green release tab. This tab is used to release and
To reduce the risk of personal injury, stabilize the rack cabinet and extend all anti-tilt
"Stabilize the Rack for Installation" on page
29.
Advertisement
Table of Contents
Need help?
Do you have a question about the Exadata Storage Server X6-2 High Capacity and is the answer not in the manual?