Table of Contents
Advertisement
2.
Starting with either the left or right side of the rack, align the rear of the slide-
rail assembly against the inside of the rear rack rail, and push until the assembly
locks into place with an audible click.
Align the front of the slide-rail assembly against the outside of the front rack rail,
3.
and push until the assembly locks into place with an audible click.
4.
Repeat steps 1 through 3 to attach the second slide-rail assembly to the other
side of the rack.
Related Information
"Install Mounting Brackets" on page 30
■
Attach Tool-Less Slide-Rail Assemblies
Installing the Storage Server Into a Rack
37
Advertisement
Table of Contents
Need help?
Do you have a question about the Exadata Storage Server X6-2 High Capacity and is the answer not in the manual?