Seat Post Min/Max Insertion - Argon 18 E-119 TRI+ 284A Assembly Manual

E-119 TRI+ 284A: 19. Seat Post Min/Max insertion
Refer to the tables below for details on Saddle Height and SeatPost insertion limits.
i. The correct frame size must be determined according to the saddle height limits.
A. Minimum Saddle Height
D. Maximum Saddle Height
ii. Depending on the size of the frame and the desired saddle height, the SeatPost might
need to be cut.
B. Maximal insertion depth in the Frame's SeatTube.
C. Required SeatPost cut length to be able to adjust the Saddle Height at the
Minimum position.
- Adjust the SeatPost cut length in accordance with your desired Saddle
Height.
Required minimum SeatPost Cut length = C - ("desired Saddle Height" - A)
- Example: - For a desired Saddle Height of 600mm on a XS-E 119 Frame
- The required minimum SeatPost Cut length is: 145 - (600-580) = 125mm
E. Minimal insertion depth in the Frame's SeatTube.
B
A
C
Saddle Height Limits
Size Saddle ST Max
H Min Insert
mm mm
A B
X-Small 580 130
Small 627 180
Medium 641 195
Large 667 220
X-Large 695 250
E-119 / E119+
SP Saddle SP Min
Cut H Max Insert
mm mm mm
C D E
145 775 80
95 822 80
80 836 80
55 862 80
25 890 80
53