Argon 18 E-119 TRI+ 284A Assembly Manual page 37

E-119 TRI+ 284A: 12. Cable Housing Installation (Gears)
5. Front derailleur: route the cable
up the guide, pass the front de-
Front derailleur
railleur grommet and attach to the
derailleur.
6. Rear derailleur: guide the cable
to the rear exit at the drive-side
chain stay.
7. Insert cable stop (1.11) into
1.17
cable exit hole; install 18cm cable
housing length and into rear
derailleur.
Rear derailleur
8. Install bottom bracket cover
(1.10); torque bolts to 2.5 Nm.
1.11
1.10
2.5Nm
36