Argon 18 E-119 TRI+ 284A Assembly Manual page 34

E-119 TRI+ 284A: 11. Rear Brake Installation
Recommended Rim and Tire Width and Corresponding Brake Adjustment Settings
Rim Width
(mm)
21mm
21mm
24mm
24mm
28mm
28mm
Notes:
1. Max. plunger extension length ("A") is 10.5mm - or when back end is ush with brake arm head.
2. Resulting pad clearance is measured from center of brake pad.
3. These values consider width of supplied pad; if used with di erent pad or pad holders, values
might di er.
4. Always set brake in order to get at least 2mm pad-to-rim clearance.
Hex 4mm
brake pad
adj. plunger
Brake pad
washer
Brake Pad Max. Tire
Washer Size
1x 2mm 25
2x 2mm 25
1x 2mm 25
2x 2mm 25
1x 2mm 25
2x 2mm N/A
Plunger Pos. Plunger Pos. Approx. resulting
"A" Distance "B" Distance Pad-to-rim Clearance
9.3mm 1.3mm
7mm 3.6mm
8.2mm 2.4mm
7mm 3.6mm
7mm 3.6mm
N/A N/A
A
3mm
4mm
3mm
2.5mm
2.5mm
N/A
B
33