Beretta EXCLUSIVE R Series Installer And User Manual page 39

Press the "up" and "down" keys to select the desired time band and press
"ok" to confirm the selection.
START END
START END
07:30 08:30
11:30 13:30
18:00 22:30
USE THE ARROWS TO MODIFY
USE THE ARROWS TO MODIFY
To confirm or cancel the selection made, highlight the corresponding option
and confirm it by pressing "ok".
In order to confirm that the operation has been completed successfully, the
display will show the table with the selected time frame flashing just before
deleting it from the table.
START END
START END
07:30 08:30
11:30 13:30
18:00 22:30
CONFIRM OR DELETE SELECTION
CONFIRM OR DELETE SELECTION
13.4 Copy
This function serves to copy the scheduled programme for the selected day.
Press "ok" to select the function, after having highlighted it (if necessary)
using the "up" and "down" keys.
START END
START END
07:30 08:30
11:30 13:30
18:00 22:30
SELECT OPTION
SELECT OPTION
Press the "up" and "down" keys to select the day on which to copy the
hourly schedule and press "ok" to confirm the selection.
SELECT DAYS ON WHICH YOU WANT
SELECT DAYS ON WHICH YOU WANT TO COPY
TO COPY SCHEDULE OF THURSDAY
SCHEDULE OF THURSDAY
MON MON TUE TUE
USE THE ARROWS TO MODIFY
USE THE ARROWS TO MODIFY
The day will be highlighted and others can be selected using the same
procedure.
When finished highlight
CONFIRM
SELECT DAYS ON WHICH YOU WANT
SELECT DAYS ON WHICH YOU WANT TO COPY
TO COPY SCHEDULE OF THURSDAY SCHEDULE OF THURSDAY
MON MON TUE TUE
USE THE ARROWS TO MODIFY USE THE ARROWS TO MODIFY
MAIN
MAIN
THURSDAY
THURSDAY
SELECT
SELECT
PERIOD TO PERIOD TO
MODIFY
DELETE
MAIN MAIN
THURSDAY
THURSDAY
ARE YOU SURE
ARE YOU SURE
TO DELETE TO DELETE
THE PERIOD ?
THE PERIOD ?
CONFIRM
CONFIRM
CANCEL CANCEL
MAIN MAIN
THURSDAY
THURSDAY
ADD ADD
MODIFY MODIFY
DELETE DELETE
COPY
COPY
MAIN MAIN
WED WED THU THU FRI FRI
SAT SUN
SAT SUN
CONFIRM CONFIRM
and press "ok".
MAIN MAIN
WED WED THU THU FRI FRI
SAT SAT SUN SUN
CONFIRM
CONFIRM
In order to confirm that the operation has been completed successfully, the
display will show the list of days to which the scheduled programme has
been copied.
SCHEDULE OF THURSDAY
SCHEDULE OF XXX WILL BE COPIED ON THE
WILL BE COPIED ON THE DAYS :
TUESDAY
USE THE ARROWS TO MODIFY USE THE ARROWS TO MODIFY
14 FAULTS
If any faults should occur, a screen will appear on the display indicating
the relative error code and a brief alphanumeric description of the same.
Pressing the "back" button it is possible to return to the main screen,
where a fault is signalled by this flashing icon
The user can return to the fault description screen by using the "up" and
"down" keys and then pressing the "ok" key. The faults description screen
is automatically displayed once the display illumination time has elapsed
without any button being pressed.
Press the "up" and "down" keys to display the descriptions of any other
faults that may be present.
FRI FRI
18/05/2013
MENU MENU
INFO INFO
HOT WATER TEMPERATURE HOT WATER TEMPERATURE
or fault E041
F
If the pressure drops below the safety threshold of 0.3 bar the boiler displays
the fault code "E041 - WATER TRANSDUCER LOAD THE SYSTEM" for a
transitional time of 10 min during which it is possible to open the external
filling tap until the pressure is between 1 and 1.5 bar.
WATER TRANSDUCER WATER TRANSDUCER
LOAD THE SYSTEM
PRESS OK FOR AUTO FILL
b
If the pressure drops frequently, contact the Technical Assistance
Centre.
For fault E091
The boiler has an auto-diagnostic system which, based on the total number
of hours in certain operating conditions, can signal the need to clean the
primary heat exchanger.
The intervention of the Technical Assistance Centre is necessary.
MAIN MAIN
DAYS : XXX
.
PLANT PLANT
12:17
1.3 bar
STATE STATE
42
°C
SET SET
E041
ENGLISH
39