Motion Alarm; Motion Configuration - Vitek Transcendent VT-TR2HA Series Manual

Alarm Management
Configure the trigger alarm-out in the window. The system will trigger the alarm-out Configure the trigger alarm-out in the window. The system will trigger the alarm-out
automatically when the sensor alarm is triggered. You need to set the delay time and the automatically when the sensor alarm is triggered. You need to set the delay time and the
schedule of the alarm outputs. See 9.5.1 Alarm-out for details. schedule of the alarm outputs. See 9.5.1 Alarm-out for details.
Preset: check it and then the "Trigger Preset" window will pop up automatically. Configure the Preset: check it and then the "Trigger Preset" window will pop up automatically. Configure the
trigger preset of each camera. To add presets, please see 6.2 Preset Setting for details. trigger preset of each camera. To add presets, please see 6.2 Preset Setting for details.
Buzzer: if enabled, the system will begin to buzz when the sensor alarm is triggered. To set the Buzzer: if enabled, the system will begin to buzz when the sensor alarm is triggered. To set the
delay time of the buzzer, please see 9.5.4 Buzzer for details. delay time of the buzzer, please see 9.5.4 Buzzer for details.
Pop-up Video: After camera setting, the system will pop up the corresponding video Pop-up Video: After camera setting, the system will pop up the corresponding video
automatically when the sensor alarm is triggered. To set the duration time of the video, please automatically when the sensor alarm is triggered. To set the duration time of the video, please
see 9.5.3 Display for details. see 9.5.3 Display for details.
Pop-up Message Box: if enabled, the system will pop up the corresponding alarm message box Pop-up Message Box: if enabled, the system will pop up the corresponding alarm message box
automatically when the sensor alarm is triggered. To set the duration time of the message box, automatically when the sensor alarm is triggered. To set the duration time of the message box,
please see 9.5.3 Display for details. please see 9.5.3 Display for details.
E-mail: if enabled, the system will send an e-mail when the sensor alarm is triggered. Before E-mail: if enabled, the system will send an e-mail when the sensor alarm is triggered. Before
you enable the email, please configure the recipient's e-mail address first (see 11.1.5 E-mail you enable the email, please configure the recipient's e-mail address first (see 11.1.5 E-mail
Configuration for details). Configuration for details).

9.2 Motion Alarm

Motion Alarm: when motion appears in the specified area, it will trigger the alarm. You should Motion Alarm: when motion appears in the specified area, it will trigger the alarm. You should
enable the motion of each camera first and then set the alarm handling of the camera to enable the motion of each camera first and then set the alarm handling of the camera to
complete the whole configuration of the motion alarm. complete the whole configuration of the motion alarm.
9.2.1

Motion Configuration

Motion Configuration
Click Start Settings Camera Motion to go to the following interface. Click Start Settings Camera Motion to go to the following interface.
70 70
DVR User Manual DVR User Manual