Accessing The Camera Files With Windows Explorer - FLIR X6520sc Series User Manual

9
Interfaces
3. Set the IP address to 169.254.242.10 and the subnet mask to 255.255.255.0.
Click the OK button.
4. The camera can now be accessed:
• Use Windows Explorer to access camera files such as CNUC, lens, and filter ID
descriptors.
• Use ResNet to access the camera registry. ResNet is an internal tool. Contact
your FLIR service department for more information.

9.2.4 Accessing the camera files with Windows Explorer

9.2.4.1 General
Note
• The camera must be connected to the computer using the USB cable.
• The USB drivers must be correctly installed.
When the camera is connected to the computer with the USB cable (the Ethernet con-
nection to the camera must be disabled), type the address of the camera in Window Ex-
plorer. The address can be in the form of:
• The camera's IP address: 169.254.242.23.
• The camera's SMB name: Platinum.
9.2.4.2 Procedure
The Windows 7 default configuration needs to be modified to allow correct display of the
camera files in Windows Explorer:
1. Open the Local Security Policy control panel. It can be easily found by typing "Local"
in the Windows Start Menu search field.
#T810207; r. AA/43061/43086; en-US
54