About Disconnect Cause Types - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

About disconnect cause types

The following parameters are logged when a call is discon-
nected. The disconnect cause types are used in disconnect
events (xEvent) and also logged in xHistory CallLogs.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration
CauseType
CauseString
CauseCode
CauseOrigin
Example 1:
xHistory CallLogs Call 694
...
*h xHistory CallLogs Call 694 DisconnectCause: "Normal"
*h xHistory CallLogs Call 694 DisconnectCauseType: RemoteDisconnect
*h xHistory CallLogs Call 694 DisconnectCauseCode: 16
*h xHistory CallLogs Call 694 DisconnectCauseOrigin: Q850
...
** end
xCommand
Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
Describes the Cause Code.
The disconnect Cause Codes are defined in SIP and Q.850.
SIP, Q.850, internal.
178
API Reference Guide
xStatus Appendices Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.