Xconfiguration Audio Input Microphone [1; Xconfiguration Audio Output Line [1] Delay Delayms; Xconfiguration Audio Output Line [1] Delay Mode - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction
xConfiguration Audio Input Microphone [1..2] Level
Define the audio level of the Microphone input connector.
Requires user role: ADMIN
Default value: 14
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 1..2
Level
: Integer (0..24)
Select a value between 0 and 24, in steps of 1 dB.
xConfiguration Audio Input Microphone [1..2] Mode
Disable or enable audio on the microphone connector.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 1..2
Mode
: Off/On
Off: Disable the audio input microphone connector.
On: Enable the audio input microphone connector.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xConfiguration
n Level: Level
n Mode: Mode
xCommand

xConfiguration Audio Output Line [1] Delay DelayMs

To obtain lip-synchronization, you can configure each audio line output with an extra delay that
compensates for delay in other connected devices, for example TVs. The delay that you set
here is either fixed or relative to the delay on the HDMI output, as defined in the Audio Output
Line [n] Delay Mode setting.
Requires user role: ADMIN
Default value: 0
USAGE:
xConfiguration Audio Output Line
where
n
: Unique ID that identifies the audio line output. Range: 1..6
DelayMs
: Integer (0..290)
The delay in milliseconds.

xConfiguration Audio Output Line [1] Delay Mode

You may add extra delay to an audio line output with the Audio Output Line [n] Delay DelayMs
setting. The extra delay added is either a fixed number of milliseconds, or a number of millisec-
onds relative to the detected delay on the HDMI output (typically introduced by the connected
TV).
Requires user role: ADMIN
Default value: RelativeToHDMI
USAGE:
xConfiguration Audio Output Line
where
n
: Unique ID that identifies the audio line output. Range: 1..6
Mode
: Fixed/RelativeToHDMI
Fixed: Any extra delay (DelayMs) added to the output, will be a fixed number of
millisecond.
RelativeToHDMI: Any extra delay (DelayMs) added to the output, will be relative to the
detected delay on the HDMI output. The actual delay is HDMI-delay + DelayMs. The
Audio Output Connectors Line [n] DelayMs status reports the actual delay.
42
API Reference Guide
xStatus Appendices
n Delay DelayMs: DelayMs
n Delay Mode: Mode
Copyright © 2016 Cisco Systems, Inc. All rights reserved.