Xcommand Phonebook Contactmethod Add; Xcommand Phonebook Contactmethod Delete - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Phonebook ContactMethod Add

Add contact details for an existing contact in the local phonebook. The command returns the
ContactMethodId, which is a unique string that identifies the contact method; typically the
format is "n".
You can add several contact methods to a contact. Note that only the first contact method
will appear in the Favorites list on the Cisco TelePresence Touch controller. The first contact
method may have been created when issuing the xCommand Phonebook Contact Add
command to make the contact. All contact methods are available in the API, on the web inter-
face and when using the remote control.
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook ContactMethod Add ContactId: "ContactId" [Device: Device]
Number: "Number" [Protocol: Protocol] [CallRate: CallRate] [CallType: CallType]
where
ContactId: String (0, 255)
The unique identifier for the contact that you want to add a contact method to. The
identifier will be returned by an xCommand Phonebook Search command. It was also
returned when the xCommand Phonebook Contact Add command was issued to make
the contact.
Device: Mobile/Other/Telephone/Video
Set which type of device to call to.
Number: String (0, 255)
The phone number or address of the contact.
Protocol: Auto/H320/H323/SIP
Select protocol.
CallRate: Integer (0..6000)
Set a call rate.
CallType: Audio/Video
Select a call type (audio or video).
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xCommand xCommand

xCommand Phonebook ContactMethod Delete

Delete a contact method from an existing contact in the local phonebook.
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook ContactMethod Delete ContactId: "ContactId" ContactMethodId:
"ContactMethodId"
where
ContactId: String (0, 255)
The unique identifier for the contact you want to change. The identifier will be returned
by an xCommand Phonebook Search command. It was also returned when the
xCommand Phonebook Contact Add command was issued to make the contact.
ContactMethodId: String (0, 255)
The unique identifier for the contact method you want to delete. The identifier will be
returned by an xCommand Phonebook Search command. It was also returned when the
xCommand Phonebook ContactMethod Add command was issued to make the contact
method.
111
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.