Checking The Springs; Assembling The Clutch - APRILIA RSV4 Factory Service Station Manual

Hide thumbs Also See for RSV4 Factory:

Table of Contents

Checking the springs

THE FOLLOWING PROCEDURE IS VALID FOR ALL CLUTCH SPRINGS.

Check the springs for damage and, if

necessary, replace the them all togeth-

Measure the clutch spring length when

unloaded; if necessary, replace the

springs all together.

Characteristic

Minimum wear limit in the release position of

the individual clutch springs

46.8 mm (1.84 in)

Insert the thrust bearing with the collar

facing the gearbox

Insert the spacer.

RSV4 Factory