APRILIA RSV4 Factory Service Station Manual page 385

Hide thumbs Also See for RSV4 Factory:

Table of Contents

RSV4 Factory

Disassembling

Remove the steering assembly com-

Unscrew and remove the lower dowel

fastening the collar.

Remove the lower collar.

Unscrew and remove the upper dowel

fastening the collar.

Remove the upper collar.

Fit the upper collar.

Partially tighten the dowel in the rela-

tive threaded hole, so that it protrudes

by no more than 2 or 3 mm into the

conical surface.

Fit the bushing in its seat, ensuring that

the seal (in the groove in the bushing)

remains in place.

Press the bushing into place with a rub-

Tighten the dowel to the specified tor-

Repeat the procedure for the lower