Service Warning Light Reset; Vehicle Servicing Reset - APRILIA RSV4 Factory Service Station Manual

Electrical system
Modify Keys
With this function the instrument panel can update the keys. Up to 4 keys can be stored.
The user code is first requested to be entered:
•
ENTER THE CODE
After entering the correct code, the following message should be shown on the display:
•
INSERT THE X KEY
•
INSERT THE X+1 KEY
At least one key must be programmed for the next start-ups. If no other key is inserted within 20 seconds
or if there is no power or after the fourth key is programmed, the procedure finishes and all the functions
of the vehicle and the instrument panel must be enabled (even if only one key has been programmed).
Km / miles
This menu selects the unit of measurement, either for the speed or the total or partial odometers.
•
KM
•
MILES
LANGUAGES
Select the user interface language from this menu.
•
ITALIANO
•
ENGLISH
•
FRANCAIS
•
DEUTSCH
•
ESPAÑOL

Service warning light reset

VEHICLE SERVICING RESET

This function is used to reset vehicle servicing. Using this function, the odometer can be reset only once
within the first 200 km (124 mi) of the vehicle, provided this has not been done by the Quality Check.
In order to activate this function follow the instructions in the DIAGNOSIS section.
See also
Diagnosis
ELE SYS - 140
RSV4 Factory