APRILIA RSV4 Factory Service Station Manual page 122

Hide thumbs Also See for RSV4 Factory:

Table of Contents

Electrical system

154. Air temperature sensor

155. Upper injector 1 cable harness connector (output "23") - black connector

156. Self-tapping screw

Connect the upper injectors as shown in the figure and according to the following sequence:

Injector 1 (output "23"): BLACK connector

Injector 2 (output "20"): BROWN connector

Injector 3 (output "22"): GREEN connector

Injector 4 (output "21"): GREY connector

TABLE ZL - 7SM CONTROL UNIT FITTING AND

After connecting the upper injector connections

and the air temperature sensor connector, the

7SM control unit can be fastened, which was pre-

viously fastened to its relative mounting.

158. Self-tapping screw

ELE SYS - 122

RSV4 Factory