Mounting The Engine; Engine Mount Installation - Seagull Models MAULE SUPER ROCKET 15CC Assembly Manual

Maule SUPER ROCKET
Fuel pick up tube.
9) Connect the lines from the tank to the en-
gine and muffler. The vent line will connect
to the muffler and the line from the clunk to
the carburetor.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should flow
through easily.

ENGINE MOUNT INSTALLATION.

1) Locate the items necessary to install
the engine mount included with your
model.
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the firewall. Tighten the screws .
Make sure to use threadlock on the screws to
help prevent them from vibrating loose.
10
Vent tube.
Fuel fill tube.
.
4x30mm
Instruction Manual.
Thread locker glue.

MOUNTING THE ENGINE.

1) Position the engine with the drive
washer (145mm) forward of the firewall
as shown.
145mm
2) Use a pin drill and 4mm drill bit to
drill a small indentation in the mount for
the engine mounting screw.
4mm
3) Use a drill to drill the four holes in the
engine mount rails.