Connecting The Smartnode To A Laptop Pc; Connecting Smartnode Device And Pc To A Lan With Dhcp Server - Patton SmartNode 5540 Series User Manual

SmartNode 5540 & 4140 Series User Manual
The SmartNode device has a fixed IP and a DHCP client setup to simplify
Note
configuration. The Ethernet port is equipped with Auto-MDX so you can
use a straight-through cable for host or hub/switch connection.
There are two options for configuring the SmartNode device
1. The SmartNode device is connected to a laptop PC (see
same range as the SmartNode device's IP address (for instance: PC's IP address; 192.168.1.10; mask:
255.255.255.0).
2. The SmartNode device is connected to a local area network (LAN) that has a DHCP server running which
assigns an IP address to the SmartNode device (see
Node device's IP can be determined.
Figure 15. Connecting SmartNode device and PC to a LAN with DHCP server.
Connecting the SN4140 to a laptop PC
Figure 14. Connecting the SmartNode to a laptop PC
:
figure 14) that is configured with a fixed IP in the
figure 15). Using the SN Discovery
4 • Initial Configuration
tool, the Smart-
39