Table of Contents
Advertisement
SmartNode 5540 & 4140 Series User Manual
Introduction
The Reset button (see
figure 22
the SN5540 Reset button location) is used to do the following:
•
Reboot the SmartNode device (see section
Power LED is lit"
on page 66)
•
Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
is lit"
on page 66)
•
Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
"Resetting the SmartNode device when it is operating and the Power LED is lit"
•
Troubleshoot the SmartNode device if it is not booting properly (see section
when it is initially powered off "
Introduction
on page 65 for the SN4140 Reset button location, and
"Resetting the SmartNode device when it is operating and the
"Resetting the SmartNode device when it is operating and the Power LED
on page 67)
Figure 22. SN4140 Reset button
F • Reset Button Functions
figure 23
on page 66 for
on page 66)
"Resetting the SmartNode device
65
Advertisement
Table of Contents
