Lonworks - Carrier RTU Open v5 Integration Manual

Communications wiring

Refer to Appendix A (page 41) for the Network Points list.

Refer to Appendix D (page 58) for the Protocol Implementation Conformance Statement.
Software settings defined through the Equipment Touch device. To confirm settings, obtain a Modstat of the
device. On the Equipment Touch, click the link to the Modstat.

LonWorks

WARNING
When you handle the LonWorks Option Card:

Do not contaminate the printed circuit board with fingerprints, moisture, or any foreign material.

Do not touch components or leads.

Handle the board by its edges.

Isolate from high voltage or electrostatic discharge.

Ensure that you are properly grounded.
Refer to Appendix E (page 60) for the LonWorks Protocol Implementation Conformance Statement (PICS).
RTU Open v5
Integration Guide
16
CARRIER CORPORATION ©2019
All rights reserved