Drive System Electronic Board Disassembly/Assembly (For Adfinity™ X20R, 20D, X20D, X20C, X24D) - Advance acoustic Adfinity 17ST Service Manual

ENGLISH SERVICE MANUAL
ELECTRICAL SYSTEM
DRIVE SYSTEM ELECTRONIC BOARD DISASSEMBLY/ASSEMBLY (For Adfinity™ X20R, 20D, X20D,
X20C, X24D)
Disassembly
1. Disconnect the battery connector (12).
2. Move aside the recovery water drain hose (16).
3. Remove the battery charger cable (6) from the cable holder (7).
4. Remove the screws (A) and carefully move aside the panel (B) by disengaging the cable grommet (C) from its housing on the
panel (B).
5. Disconnect the connectors (D), (E), (F), and remove the panel (B).
6. Disconnect the connectors (G) of the drive system electronic board (H).
7. Remove the screws (I) and move the electrical panel (J) by disengaging it from the lower fastener (K).
8. Remove the screws (L) on the rear side of the electrical panel (J), then remove the drive system electronic board (H).
Assembly
9. Assemble the components in the reverse order of disassembly.
E
D
B
A
B
A
80
9096982000
F
A
A
C
H
G
S301573A
Adfinity™ 17ST / 20ST / X20R / 20D / X20D / X20C / X24D
L
L
J I
I
G
K
J
S301574A